Custom Bit Mouth Styles

07

Low port mouthpiece with copper roller and hood, no tongue relief. Height of mouthpiece -approx. 1 "-1 1/4"

08

Low port mouthpiece with copper roller, no tongue relief. (Same as -07 but without a copper hood.) Height of mouthpiece -approx. 1 "-1 1/4"

23

Lower mouthpiece with some tongue relief. (Same as MP-10 but without the roller.) Height of mouthpiece -approx. 1 "and under

22
Low mouthpiece with tongue relief.
Height of mouthpiece -approx. 1 "-1 1/4"

54
Lower mouthpiece with some tongue relief.
Height of mouthpiece - approx. 1 "& under

33
Low mouthpiece with tongue relief.
Height of mouthpiece -approx. 1 "-1 1/4"

34
Low port mouthpiece with copper roller, tongue relief.
Height of mouthpiece - approx. 1 "- 1 1/4"

24
Lower mouthpiece with tongue relief, has two copper rollers on the bars, is pretty popular, not severe -- has movement to sides, up and down (same as MP-45).
Height of mouthpiece - approx. 1 "& under

53 forward tilt
Lower mouthpiece with tongue relief is pretty popular, not severe -- has movement to sides, up and down (same as MP-45).
Height of mouthpiece - approx. 1 "& under

10
Lower port mouthpiece with copper roller, no tongue relief. (Same as MP-23 but with a roller)
Height of mouthpiece - approx. 1 "

51
Low Rounded port mouthpiece; it's solid without movement with some tongue relief.
Height of mouthpiece - approx. 1"- 1 1/4"

11
Medium mouthpiece with a iron cricket with lines of copper Inlay, some tongue relief.
Height of mouthpiece - approx. 1 1/2"

12
Medium mouthpiece with a iron cricket with lines of copper Inlay, no tongue relief, copper cover and bar thickness
Height of mouthpiece - approx. 1 1/2"

15
Medium mouthpiece with a copper cricket, some tongue relief, bar is thinner than MP-11 & MP-12.
Height of mouthpiece - approx. 1 1/2"

21
Medium mouthpiece with tongue relief.
Height of mouthpiece- approx. 1 1/2"

39
Medium mouthpiece with a iron cricket with lines of copper Inlay, no tongue relief, copper cover and bar thinner than MP-15. (Same as MP-12 but with a thinner bar)
Height of mouthpiece - approx.1 1/2"

42
High Ported mouthpiece has a lot of movement to the sides ,up and down. (Same as MP-47 but without a copper cricket or roller.)
Height of mouthpiece - approx. 2 "

47
High Ported mouthpiece with a copper cricket, has a lot of movement to the sides ,up and down. (Same as MP-42 but with a copper cricket, roller.)
Height of mouthpiece - approx. 2 "

35
High pointed port mouthpiece with copper roller, no tongue relief.
Height of mouthpiece - approx. 2" No tongue relief

14 ($35 extra)
Extra High mouthpiece with spoon, iron cricket and copper wires.
Height of mouthpiece higher- approx. 3"-4" No tongue relief

30 ($35 extra)
Higher mouthpiece with straight bar, iron roller, spoon and copper wires.
Height of mouthpiece higher- approx. 2 1/2" No tongue relief

50
High port mouthpiece with tongue relief. The thickness of the bars and port is the same but the upper part of the port is flat. Pretty severe -- more than MP-19 and less than MP-32. (Same as MP-19 but upper part of port is flat.)
Height of mouthpiece - approx. 2"

40
High narrow port mouthpiece with copper roller and hood, some tongue relief.
Height of mouthpiece - approx. 2"

49
High port mouthpiece with tongue relief.
Height of mouthpiece - approx. 2"

27
High port mouthpiece with tongue relief.
Height of mouthpiece -approx. 2 "

20
High port mouthpiece, tongue relief.
Height of mouthpiece -approx. 2 "

19
High port mouthpiece with tongue relief. Same thickness for the bars and port.
Height of mouthpiece -approx. 2 "

16
High port mouthpiece with 4 copper Crickets , no tongue relief.
Height of mouthpiece - approx. 2"

09
High port mouthpiece with copper roller, no tongue relief.
Height of mouthpiece - approx. 2"

06
High port mouthpiece with copper roller, tongue relief.
Height of mouthpiece - approx. 2"

03
High port mouthpiece with copper roller, some tongue relief.
Height of mouthpiece - approx. 2"

02
High port with copper roller and hood, some tongue relief.
Height of mouthpiece - approx. 2"

01
High port with copper roller and hood, some tongue relief.
Height of mouthpiece - approx. 2"

28
High port mouthpiece with 4 copper rollers.
Height of mouthpiece - approx. 2"

32
High mouthpiece. The arms of the bar are thicker than the port. The port is thin at the top. Pretty severe -- the most severe of the three: MP-19, MP-32, and MP-50
Height of mouthpiece - approx. 2"
Tongue relief.

26
Extra High port mouthpiece with tongue relief.
Height of mouthpiece - approx. 3"-4" extra high

62
High port mouthpiece with tongue relief. The port is thinner than the bars and angles back. Pretty severe --
Height of mouthpiece - approx. 2"

25
Two metal pieces attached at the center to form a jointed bar, or snaffle. This type of mouthpiece has a lot of movement to the sides, up and down.
also available in twisted wire 55

46
Two metal pieces attached at the center to form a jointed bar with 3 copper rollers. This mouthpiece is pretty popular -- it has a lot of movement to the sides, up and down.